? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web site - www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron semiconductor technical data data sheet 4334, rev. - hermetic power mosfet n-channel features: ? 100 volt, 75a, 0.02 ohm, mosfet ? isolated hermetic metal package ? fast intrinsic rectifier ? low r ds (on) ? low package inductance-easy to drive and protect maximum ratings all ratings are at t c = 25 c unless otherwise specified. rating symbol min. typ. max. units gate to source voltage v gs - - 20 volts on-state drain current @ t c = 25 c i d (on) - - 75 amps pulsed drain current @ t c = 25 c i dm - - 300 amps operating and storage temperature t op /t stg -55 - +150 c thermal resistance, junction to case r thjc - - 0.32 c/w total device dissipation @ t c = 25 c p d - - 390 watts electrical characteristics rating symbol min. typ. max. units drain to source breakdown voltage v gs = 0v, i d = 250 a bv dss 100 - - volts static drain to source on state resistance v gs = 10v, i d = 37.5a r ds(on) - - 0.025 ? gate threshold voltage v ds = v gs , i d = 250 a v gs(th) 2.0 - 4.0 volts forward transconductance v ds = 10v, i d = 37.5a g fs 25 30 - s(1/ ? ) zero gate voltage drain current v ds = 0.8xmax. rating, v gs = 0v v ds = 0.8xmax. rating, v gs = 0v, t j = 125 c i dss - - - 200 1.0 a ma gate to source leakage forward v gs = 20v gate to source leakage reverse v gs = -20v i gss - - 100 -100 na turn on delay time v ds = 0.5v, rise time i d = 37.5a, turn off delay time r g = 2.0 ? , fall time v gs = 10v t d(on) t r t d(off) t f - 40 60 100 30 60 110 140 60 nsec diode forward voltage t c = 25 c, i s = 75a, v gs = 0v v sd - - 1.75 volts reverse recovery time t j = 25 c i f = 75a, -di/dt = 100a/ sec, v r = 100v t rr - 300 - nsec input capacitance v gs = 0 v output capacitance v ds = 25 v reverse transfer capac itance f = 1.0mhz c iss c oss c rss - 4500 1300 550 - pf SHD219601
? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web site - www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron technical data data sheet 4334, rev. - mechanical dimensions: in inches / mm lcc-3p pinout table device type pin 1 pin 2 pin 3 n channel mosfet in a lcc-3p package drain source gate SHD219601 disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety s hould be ensured by using semi conductor devices that featur e assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of info rmation, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be ap plied to that purpose by their direct purchasers or any thir d party. when exporting these products (technolog ies), the necessary procedures are to be taken in accordance with related laws and regulatio ns. .145 (3.68) .450 (11.43) .140 (3.56)typ. .035 (.89) min. .050 (1.27) .375 (9.53) .037 (.94) .625 (15.88) .415 (10.54) .157 (3.99) .030 (.76) min. 1 2 3
|
